View Single Post
  #1  
Old 04-07-2006, 06:35 PM
cjmm's Avatar
cjmm cjmm is offline
TE Junior Member
 
Join Date: Dec 2005
Posts: 324
Default To plimrn: Thanks Patricia

For both your visits. My trip is going fine although with lots of work.

About details and sharpnes...

I feel there are two things, the first one being the lenses.

If I know they are not as sharp -wide open- as the good ones (which are too expensive), I try setting the f/stop around the 'sweet spot' (usually f/8, for most lenses).

Then, there is the way in which you apply USM. I set the in camera parameters to 'neutral' and apply USM viewing the image at 100%. Generally I use (in Photoshop) a somehow light setting (150; 0.2; 0) which I repeat until the small details are visible, but without sharpening artifacts.

I started trying this after doing some experimenting and feel that is what gives me best results.

Best regards, saludos!
Carlos
Reply With Quote